Brand Name : Focus Infra or OEM
Model Number : 2.5*60MM
Place of Origin : China
MOQ : 50000pcs
Price : Negotiable
Payment Terms : T/T
Supply Ability : 3000000pcs per month
Delivery Time : 15 days
Packaging Details : 100pcs/bag
Product name : PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protectors
Use : Fiber Joint Protection
Brand : Focus Infra or OEM
Material : PE Tube, EVA Tube, 304SUS Steel Rod
Application : FTTH Fiber Fusion Connect
Length : 2 3/8 Inch
Diamter : 2.5mm
Color : Clear
Operating Temperation : -45°C to +120°C
PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protectors
Description:
PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protectors is consist of cross linked polyolefin, hot melt tubes and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices.
PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protector intends to protect (mechanically) fiber optic splices. PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protector is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation.
PE 2.5mm Diameter 2 3/8" Length Single Fiber Heat Shrink Fiber Fusion Splice Protector is fitted to the sleeve holders that are generally exist in fiber optic trays.
Features:
1. The hot-melt adhesive inner tube bonds to both the fiber and the heat shrinkable outer tubes to encapsulate the fusion splice joint and provides vibration damping and an environment seal protecting the fiber from damage and contaminants.
2. The outer high quality irradiation cross-linked polyolefin heat shrinkable tubing provides an instant shrink-force and drives the adhesive liner into all areas of the splice and excludes all the air.
3. The stainless steel rod provides additional rigidity to prevent. Misalignment, micro bending or breakage of the fiber according to the diameter after shrinking and accommodate fiber diameter.
Technical Parameters:
Specification | Test method | Typical data |
Tensile strength(MPa) | ASTM D 2671 | 18 |
Elongation at Break (%) | ASTM D 2671 | 700 |
Density(g/cm2) | ISO R1183D | 0.94 |
Dielectric strength (KV/mm) | IEC 243 | 20 |
Permittivity | IEC 243 | 2.5 |
Length rate of change (%) | ASTM D 2671 | +5 |
PE Fibre Splice Protectors 2.5*60MM 2 3/8 Inch Fiber Heat Shrink Sleeve Images |